Ghost Face Voice Changer: Get the Scream Voice

A ghost face voice changer turns your normal speaking voice into the deep, raspy, breathy phone-caller sound that the Ghostface character made iconic across the Scream films. It is one of the most requested Halloween effects every year, and with the right chain of audio effects you can recreate it on your own PC in a few minutes, then route it into Discord, streams, or game chat.

This guide breaks down exactly what defines that sound, how to rebuild it from scratch with effects, and gives you a numbered walkthrough for building a Ghostface preset in VoxBooster and sending it to a virtual microphone. There is also a settings table you can copy, plus a clear note on using it responsibly.

TL;DR

The Ghost Face voice is a stack of four things: a slight pitch drop, rasp or light distortion, breath, and a telephone band-pass filter.
You do not need any movie audio. Recreate the voice with your own voice and effects, which keeps it parody or personal use.
In VoxBooster, chain pitch down (-3 to -5 semitones), rasp/distortion, a breath layer, and a 300 to 3400 Hz band-pass, then save it as a preset.
Route the output to a virtual microphone to use the voice live on Discord, Zoom, OBS, or in games.
Use it for fun only. Never use it for anonymous threats, harassment, or prank calls that scare or deceive people. That can be illegal.

What defines the Ghost Face voice?

The Ghostface voice is a low, gravelly, breathy whisper heard as if through a phone line. It sits a few semitones below the speaker’s natural pitch, carries a raspy texture from constricted, dry-throat delivery, includes audible breath between phrases, and is filtered so the highs and lows are cut like a telephone earpiece. Together those traits create that unmistakable menacing caller sound.

If you want to nerd out on the source material, the Ghostface character and the Scream film series both have detailed write-ups. The voice in the movies was performed by an actor over the phone, which is a big part of why the telephone EQ matters so much to the effect.

The four ingredients you actually need

Every convincing Ghostface voice changer preset comes down to layering four effects. Understand what each one does and you can dial the sound in on almost any tool, not just VoxBooster.

1. A slight pitch drop

The Ghost Face voice is lower than most people’s speaking pitch, but it is not a monster growl. Push the pitch down only about 3 to 5 semitones. Go too far and you lose intelligibility and it starts to sound like a generic demon rather than a creepy human caller. The goal is menacing but still clearly a person on the other end of the line.

2. Rasp and light distortion

The signature grit comes from a dry, raspy vocal texture. In audio terms you recreate it with a touch of distortion, saturation, or a rasp effect. Keep it light. A small amount adds that gravelly edge; too much turns the voice into buzzy noise and kills the words. Rasp is what separates a Ghostface voice from an ordinary pitched-down voice.

3. Breath

Ghostface breathes. Audible inhales and exhales between lines are central to the character’s tension. If your tool has a breath or air layer, add a subtle amount. If not, you can lean into it with your delivery by breathing close to the microphone. Breath is the detail most beginners skip, and adding it instantly makes the voice more recognizable.

4. Telephone band-pass filter

This is the single most important ingredient. A phone line rolls off the deep lows and crisp highs, leaving a narrow midrange band. Recreate it with a band-pass filter that keeps roughly 300 Hz to 3400 Hz and cuts everything outside that. That narrow, thin, boxy quality is what makes listeners instantly picture a phone call, and it is what glues the whole effect together.

How do I make my voice sound like Ghostface?

To make your voice sound like Ghostface, lower your pitch a few semitones, add rasp or light distortion for the gravelly texture, mix in breath, and apply a telephone band-pass filter around 300 to 3400 Hz. Then perform the part: speak slowly, close to the mic, in a low whisper-talk, and let breath fall between phrases. Effects plus delivery is what sells it.

The performance half matters as much as the effect chain. The scariest Scream-style delivery is deliberate and unhurried, with pauses that let the breath and rasp sit in the mix. Practice a line or two before you go live so the pacing feels natural.

Settings table: a starting Ghostface preset

Use this as a baseline and adjust to your own voice and microphone. Everyone’s natural pitch and mic tone differ, so treat these as a launch point, not gospel.

Effect	Setting	Notes
Pitch shift	-3 to -5 semitones	Lower for a bigger voice; keep words clear
Rasp / distortion	Low (about 10 to 20 percent)	Adds grit; too much buzzes
Breath / air layer	Subtle	Optional if you breathe near the mic
Band-pass low cut	300 Hz	Removes deep body, makes it thin
Band-pass high cut	3400 Hz	Cuts sparkle, mimics phone earpiece
Reverb	Very light or off	A hair of room can help; avoid big halls
Output gain	Match your normal level	So you are not suddenly loud or quiet
Noise suppression	On	Keeps the effect clean, not hissy

How to build a Ghostface preset in VoxBooster

Here is the step-by-step for creating the voice and getting it into your calls and streams. VoxBooster processes everything locally with low latency, so the transformed voice is fast enough for live conversation.

Open VoxBooster and start a new voice preset. Give it a clear name like Ghost Face so you can find it later. Select your real microphone as the input source.
Add a pitch shift and set it to about -4 semitones. Talk into the mic and adjust between -3 and -5 until it sounds deep but still human and understandable.
Add a rasp or distortion effect at a low level. Nudge it up until you hear grit, then back off slightly. You want texture, not a broken speaker.
Add a breath or air layer if available, kept subtle. If your build does not have one, plan to breathe close to the mic during delivery instead.
Add a band-pass filter with a low cut near 300 Hz and a high cut near 3400 Hz. This is the telephone sound. Toggle it on and off once and you will hear how much it defines the effect.
Add light noise suppression so the processed signal stays clean and the rasp does not turn into background hiss.
Set the output to a virtual microphone. In VoxBooster, route the processed audio to the virtual mic device so other apps can pick it up.
Save the chain as a preset and bind a hotkey. Now you can switch between your normal voice and the Ghost Face voice instantly, mid-call.
Open Discord, Zoom, OBS, or your game and select the virtual microphone as your input device. Talk, and everyone on the other side hears the Ghostface voice in real time.
Do a quick test call with a friend and fine-tune pitch, rasp, and the band-pass until the balance is right for your mic and room.

Once the preset is saved, getting into character is a single hotkey away. That makes it easy to drop the voice into a stream bit, answer a Halloween party voice chat in character, or surprise friends who are in on the joke.

Use cases for a spooky voice changer

A Ghost Face voice changer is not only a Halloween trick. A few of the most popular, and clearly harmless, ways people use it:

Halloween. Answer the door, greet party guests, or record a spooky voicemail greeting for the season.
Streaming and content. Horror streamers, reaction channels, and short-form creators use the voice for intros, bits, and character segments.
Gaming. A menacing caller voice adds atmosphere to horror games, role-play servers, and spooky community events.
Video projects. Fan edits, parody skits, and student horror shorts benefit from a strong, recognizable villain voice.
Voice chat pranks among friends. Only with people who are in on it and enjoying the joke, never to genuinely frighten anyone.

Because VoxBooster also includes a soundboard with hotkeys and OBS support, you can pair the Ghostface voice with sound cues like a phone ring, footsteps, or a knife-scrape sting for a full horror bit during a live stream.

Responsible use: keep it fun and legal

This part is not optional. A Ghost Face voice changer is meant for fun: Halloween, streaming, content, and jokes among people who are in on it. That is where it should stay.

Never use a disguised voice to make anonymous threats, to scare, harass, or intimidate anyone, or to place prank calls that could genuinely frighten or deceive someone. Making threatening or harassing calls, or impersonating someone to trick or harm them, can violate harassment, fraud, and threat laws, and can lead to real legal trouble. Scaring a stranger is not a prank, it is potentially a crime. Keep your pranks consensual and lighthearted, and always be ready to break character and reassure someone who is actually upset.

There is also an intellectual property side. Ghostface and Scream are the property of their rights holders, including Paramount and Spyglass. Recreating the voice with your own voice and effects for personal or parody use is a different thing from copying and redistributing the actual film audio. Do not use pirated movie clips. Build the sound yourself with the effect chain above, and you stay on the right side of both good manners and copyright.

Troubleshooting the Ghostface voice

If the voice does not sound right, run through these common fixes before you rebuild the whole chain.

It sounds like a generic monster, not Ghostface. Your pitch is probably too low. Bring it back toward -3 semitones and lean harder on the band-pass and rasp.
The words are hard to understand. Reduce the distortion first, then the pitch drop. Intelligibility beats intensity.
It does not feel like a phone call. Your band-pass is too wide or bypassed. Tighten it to roughly 300 to 3400 Hz.
There is hiss or crackle. Turn on noise suppression and reduce the rasp amount slightly.
Friends cannot hear the effect. Confirm the app is set to the virtual microphone, not your physical mic, as its input device.

FAQ

What is a ghost face voice changer? A ghost face voice changer is a preset or tool that reshapes your voice into the deep, raspy, breathy phone-caller sound made famous by the Ghostface character in the Scream films. It usually stacks a slight pitch drop, rasp, breath, and a telephone-style band-pass filter.

How do I make my voice sound like Ghostface? Lower your pitch a few semitones, add rasp or light distortion for that gravelly texture, mix in breath, and apply a telephone band-pass filter to mimic a phone line. Then whisper-talk slowly and closely into the mic for the best effect.

Can I use a Ghostface voice on Discord or in calls? Yes. Build the preset in VoxBooster and route the processed audio to a virtual microphone. Select that virtual mic as your input in Discord, Zoom, or your game, and friends hear the Ghostface voice in real time on voice chat.

Is using a Ghostface voice legal? Using a spooky voice for Halloween fun, streaming, or content among consenting people is fine. It is not fine to make anonymous threats, harass or scare people, or deceive anyone in a way that causes harm. Those uses can break harassment, fraud, and threat laws.

Do I need the actual movie audio to sound like Ghostface? No, and you should not use pirated movie clips. The Ghostface voice is an effect you recreate with pitch, rasp, breath, and phone-line EQ using your own voice. That keeps it parody or personal use and avoids copyright problems.

Does the Ghost Face voice work in real time? Yes. VoxBooster processes audio locally with low latency, so you speak and the transformed voice comes out fast enough for live calls, streams, and games. There is no perceptible delay for normal conversation once the preset is set up.

Can I save the Ghostface preset and switch to it with a hotkey? Yes. Save your Ghostface chain as a named preset and bind a hotkey to it. You can flip between your normal voice and the Ghost Face voice mid-call, which is handy for streams, pranks among friends, and Halloween party voice chats.

Ready to get the Scream voice?

Building a convincing Ghost Face voice takes just a few effects and a couple of minutes of tweaking. VoxBooster runs the whole chain locally with low latency, saves it as a hotkey-ready preset, and routes it to a virtual mic so you can drop into character on any call, stream, or game.

Grab the free 3-day trial on the download page, see the pricing and lifetime license, or browse more voice guides on the blog. Have fun, be kind, and save the scares for people who are in on the joke.